Products>
Pneumatic tank bottom diaphragm valve
Pneumatic tank bottom diaphragm valve
◆Specifications: 3/4"-3", DN20-DN80
◆Maximum temperature: -30 to 150 ° C (depending on the diaphragm) (stainless steel actuator)
◆Maximum temperature: -30 to 130 ° C (depending on the diaphragm) (plastic actuator)
◆Maximum pressure: one direction (DELTA P=100%)
Normally closed rubber 8bar, PTFE6bar (optional)
◆Normally closed rubber 6bar, PTFE4.5bar (standard)
◆Normally open and double acting rubber 8bar, PTFE 6bar
◆Replacement of different actuators to meet higher pressure levels
◆Forged valve body: 1.4404/316L/1.4435 NB2
◆ Casting valve body: 1.4404/316L
◆Connection method: clamp, welding, thread, flange
◆ Diaphragm material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Vitong)
◆ Certification: 3A-54-02/1580, PED97/23 EC, FDA177.2600
Online inquiry
◆Specifications: 3/4"-3", DN20-DN80
◆Maximum temperature: -30 to 150 ° C (depending on the diaphragm) (stainless steel actuator)
◆Maximum temperature: -30 to 130 ° C (depending on the diaphragm) (plastic actuator)
◆Maximum pressure: one direction (DELTA P=100%)
Normally closed rubber 8bar, PTFE6bar (optional)
◆Normally closed rubber 6bar, PTFE4.5bar (standard)
◆Normally open and double acting rubber 8bar, PTFE 6bar
◆Replacement of different actuators to meet higher pressure levels
◆Forged valve body: 1.4404/316L/1.4435 NB2
◆ Casting valve body: 1.4404/316L
◆Connection method: clamp, welding, thread, flange
◆ Diaphragm material: EPDM + PTFE (double layer) / EPDM / Silicon / FPM (Vitong)
◆ Certification: 3A-54-02/1580, PED97/23 EC, FDA177.2600
下一個(gè)：Manual bottom diaphragm valve...
